Shop holley terminator EFI service products
Holley LCD Touch Screen
The touch screen LCD provides a dynamic range of tuning and data monitoring options in a compact 3.5" LCD display
- Full Color, Backlit 3.5” Touch Screen LCD
- Laptop-Free Tuning changes to help optimize mileage, driveability and performance
- Basic Tuning options allow simple adjustments of Basic Fuel, Fuel Learn, Basic Idle, Spark, Drive-by-Wire, and Transmission
- System Tuning options allow modifications to Outputs, Engine Setup, Ignition Setup, and additional Transmission setup
- Advanced Tuning options allow fine tuning of Fuel, Closed Loop, Learn, and Idle (including IAC parameters and Idle Spark)
- Monitor a vast number of Parameters in Pre-Configured Multi-Gauge and Monitor Screens, or configure your own
- Set up ECU Datalogging, Download Datalogs to SD Card, Upload and Download Global Folders via SD Card, Update ECU Firmware and Adjust Rev Limiters 1 and 2
- Includes 3.5” Touch Screen, Mounting Sleeve, Power and Extension Harness, SD Card, and User Manual CD
- Screen Dimensions: 3.35w x 2.85h x .70" thick
- Sleeve Dimensions: 3.625w x 2.925h x 1.00" thick
Terminator Air Temperature Sensor
Replacement Air Temperature Sensor for Terminator EFI.
Terminator Fuel Injector 80lb/hr
Replacement 80 lb/hr injector for Terminator EFI.
Terminator Throttle/Transmission Kickdown Cable Bracket
Throttle cable/Transmission kick down cable combination bracket for use with Terminator EFI.
- Provides an effective mounting point for throttle cable and transmission kick down cable attachment
Terminator Input/Output Kit
PN 558-420 contains 5 extra input/output wires that the base Terminator EFI harness does not contain. It contains Input wires for Inputs 1-4. It contains one wire for Output 2. These inputs and outputs can perform features and functions that must be programmed via Holley EFI laptop software. The software also contains instructions on how to program these.
Tachometer Input Ignition Adapter
This is only used on applications using a CD Box, such as an MSD 6AL, while not using timing control.
Terminator Main Harness
Replacement main wiring harness for Terminator EFI kits 550-405 and 550-406.
Terminator Service Throttle Body
Replacement throttle body for Terminator EFI kit. Includes all sensors. Easy replacement, just swap the harness from your original throttle body and bolt it on.
- 4150 style 4BBL mounting flange - Bolts on in place of a carburetor
- Available in tumble polished and Hard Core Gray™ finishes
- Carburetor replacement EFI from the fuel systems experts!
- Serviceable sensors integrated into throttle body and pre-wired for a simple one-click connection - don’t get stranded by competitive designs
- Patent pending annular discharge fuel ring for maximum flow and optimum fuel atomization - No restrictions or delay in fuel flow like booster designs
- 950 CFM Throttle Body with CFD computer designed venturi taken from Holley’s NASCAR® throttle body
205lb/hr Performance Fuel Injectors (set of 4)
Holley EFI Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. They are available in 80 or 205 lb/hr flow rates to accommodate a variety of vehicles from mild street cars to high horsepower race applications. Holley EFI Fuel Injectors provide precision fuel delivery you can depend on.
- Bosch/EV14 performance injectors - set of 4
- High impedance for use with saturated drivers
- Rated injector flow: 205 lb/hr @ 43 PSI
- Supports up to 2600 Horsepower (8 Injectors)
- Maximum recommended fuel pressure: 75 PSI
- Requires Terminator Throttle Body Harness Part # 558-439
Terminator Throttle Body Harness
Injector upgrade harness for Terminator Throttle Body Systems. This harness is designed to be plug and play with our 205 lb/hr injector upgrade kit, Part Number 522-205.